Offline docs (switch to live docs)                          Full          UI-only         CLI-only

Networking

You can use the Web UI to manage the networking elements of MAAS, including subnets, fabrics, VLANs, and spaces. This page shows how to access and edit these elements. See Concepts and terms for the definitions of networking objects, along with a basic networking tutorial (if needed).

Main view

To access the main networking view visit the ‘Subnets’ page:

subnets

Due to the nature of this example, we re-use elements like fabrics, VLANs, subnets, and spaces. MAAS can automatically detect these elements – here there are two fabrics, one VLAN, five subnets, and two spaces – but if MAAS doesn’t find them, they can be added manually using the ‘Add’ button.

This main view can also be filtered either by fabrics or by spaces through the use of the ‘Group by’ dropdown.

Fabrics, VLANs, and spaces do not require much configuration beyond names and descriptions. You can change the MTU for a VLAN, as well as enable DHCP (see ‘Take action’ button). None of these options requires detailed instruction. A subnet, on the other hand, provides a number of configuration options relevant to the day-to-day operation of MAAS.

Subnet window

Clicking a subnet (here 192.168.100.0/24) will display its detail screen, which presents several vertical sections. Let’s take them one by one.

Subnet summary

The Subnet summary section is the largest and most complex of the subnet configuration screens:

networking

This screen presents the following configurable options:

Utilisation

This section of the subnet page presents metrics regarding address usage by this subnet.

networking

‘Subnet addresses’ shows the total number of addresses associated with the subnet, here 254. ‘Availability’ shows how many of those addresses are unused, and therefore “available”, here 189, which corresponds to a percentage of roughly 74% of the total. Finally, ‘Used’ shows the percentage that is used, here roughly 26%.

Static Routes

This section can be used to define a static route between two subnets. A route is defined on a per-subnet basis to use a particular gateway, using a configured destination and metric.

To create a static route, click the ‘Add static route’ button to reveal the edit pane. Enter a Gateway IP address, select a destination subnet from the ‘Destination’ drop-down list, and edit the routing metric value if needed. Clicking ‘Add’ will activate the route. Routes can be edited and removed using the icons to the right of each entry.

networking

Reserved ranges

The reserved ranges section of the subnet screen looks like this:

networking

This subject is treated separately in IP ranges.

Used

This section displays hosts (including controllers) associated with the used addresses along with related bits of host information.

networking